Implementasi Fmadm Untuk Mendukung Keputusan Pemilihan Jenis Lampu Di Laboratorium Teknologi Informasi Politeknik Negeri Padang

Fitri Nova

Abstract


Abstrac – Lighting installation is very necessary in designing a building. The amount oflight intensity on each room is different depending on the us ability of the room it self. Simple Additive weighting (SAW) method could be used in selecting the right lamp. The greater the value of alternative earn edit the better alternative. Based on this SAW method, it is advisable touse lights that are LED with the highest on value of 9.66, then the TL lamps with a criteria on value of 6.93.


Keywords


Cost, Lamp,Benefit, Lighting, SAW

Full Text:

PDF


DOI: https://doi.org/10.18860/mat.v8i1.3478

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2016 Fitri Nova

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

The journal is indexed by :

Dimensions Sinta CrossRef GoogleScholar
Index Copernicus Moraref Portal Garuda

 

_______________________________________________________________________________________________________________

Editorial Office:
Informatics Engineering Department
Faculty of Science and Technology
Universitas Islam Negeri Maulana Malik Ibrahim Malang
Jalan Gajayana 50 Malang, Jawa Timur, Indonesia 65144
Email: matics@uin-malang.ac.id
_______________________________________________________________________________________________________________

Creative Commons License
This work is licensed under a CC-BY-NC-SA 4.0.
© All rights reserved 2015. MATICS , ISSN : 1978-161X | e-ISSN :  2477-2550