S-Syringe (Smart Syringe) Inovasi Jarum Suntik Ga-Bi Sekali Pakai

Muhammad Habib Abdillah, Yogi Marsius Sembiring, Bimo Adi Kuncoro, Hanif Fardan Susanto, Indrawanta Iqbal Wirawan

Abstract


Jarum suntik sekali pakai memiliki peran penting dalam pencegahan infeksi nosokomial, namun risiko reuse dan pembuangan sharps yang tidak aman masih menjadi persoalan global. Penelitian ini mengusulkan S-Syringe, yaitu inovasi jarum suntik berbasis paduan Galium–Bismuth (Ga–Bi) yang dirancang untuk melembek pada suhu tubuh sehingga sulit digunakan ulang dan dapat mengurangi risiko cedera tusuk jarum. Studi ini menggunakan pendekatan rekayasa desain tanpa uji laboratorium, dengan analisis perhitungan teoritis berdasarkan massa jenis material dan dimensi jarum medis Gauge 23 (ASTM A908). Komposisi Ga–Bi 80:20 menghasilkan massa jenis campuran 6,874 g/cm³, dengan berat teoritis jarum sebesar 0,04086 g, lebih ringan 12,4% dibandingkan jarum stainless steel 304 (0,04666 g). Selain itu, sifat temperature-responsive dari paduan Ga–Bi memungkinkan jarum tetap kaku pada suhu ruang namun melembek pada suhu ~37 °C, sebagaimana didukung oleh literatur terkait jarum temperature-responsive. Temuan ini menunjukkan bahwa paduan Ga–Bi berpotensi menjadi material alternatif untuk jarum suntik sekali pakai yang lebih aman, ringan dan memiliki fitur pengamanan intrinsik. Penelitian lanjutan dibutuhkan untuk mengevaluasi kekuatan mekanik, biokompatibilitas dan performa klinis S-Syringe

Kata Kunci: Bismuth; Galium; jarum suntik; smart syringe; temperature-responsive


Full Text:

PDF

References


[1] Janik-Karpinska E, Brancaleoni R, Niemcewicz M, Wojtas W, Foco M, Podogrocki M, et al. Healthcare Waste—A Serious Problem for Global Health. Healthcare (Switzerland) 2023;11. https://doi.org/10.3390/healthcare11020242

[2] World Health Organization. HIV statistics, globally and by WHO region, 2025. 2025.

[3] Quronfuleh B, Sleath D, Rahimifard S. Circular Economy for Medical Devices: A Case Study of Syringes. Procedia CIRP, vol. 122, Elsevier B.V.; 2024, p. 449–54. https://doi.org/10.1016/j.procir.2024.01.065.

[4] Ali Khan A, Munir M, Miraj F, Imran S, Arif Siddiqi D, Altaf A, et al. Examining unsafe injection practices associated with auto-disable (AD) syringes: a systematic review. Hum Vaccin Immunother 2021;17:3247–58. https://doi.org/10.1080/21645515.2021.1911514.

[5] Tzafalia M, Sixou J-L. Administration of Anesthetics Using Metal Syringes. An Ex Vivo Study. Anesth Prog 2011;58:61–5. https://doi.org/10.2344/0003-3006-58.2.61.

[6] Agno KC, Yang K, Byun SH, Oh S, Lee S, Kim H, et al. A temperature-responsive intravenous needle that irreversibly softens on insertion. Nat Biomed Eng 2024;8:963–76. https://doi.org/10.1038/s41551-023-01116-z.

[7] Lide DR, Baysinger G, Berger LI, Goldberg RN, Kehiaian H V, Kuchitsu K, et al. CRC Handbook of Chemistry and Physics. 2005.

[8] ASTM International. Standard Specification for Stainless Steel Needle Tubing. West Conshohocken, PA: ASTM International; 2013. https://doi.org/10.1520/A0908-03R13.

[9] Owais Akhtar S, Kim JW, Bosotov D, Abdullah Y, Munsif M, Karim F, et al. Gallium Needles: Piercing Through the Future of Nanotechnology and Material Science. Fortune Journal of Health Sciences 2025;8. https://doi.org/10.26502/fjhs.253.




DOI: https://doi.org/10.18860/jomi.v1i1.37842

Refbacks

  • There are currently no refbacks.


EDITORIAL OFFICE

Department of Mechanical Engineering
Faculty of Science and Technology
Maulana Malik Ibrahim State Islamic University Malang

Jl. Locari, Tlekung, Kec. Junrejo, Kota Batu, Jawa Timur 65151.