Adsorption of Ciprofloxacyn by Plate-Like Bi4Ti3O12
Abstract
Antibiotic compound waste has attracted significant attention because of its harmful effects on aquatic environments. One of the methods reported as a potential approach for antibiotic wastewater treatment is adsorption. Bi4Ti3O12 is a triple-layer Aurivillius compound reported to exhibit adsorption properties, although research remains limited. Therefore, we synthesized plate-like Bi4Ti3O12 using the molten salt method. The adsorption test results showed that Bi4Ti3O12 reduced ciprofloxacin concentration by ~51% within 120 minutes. It shows that Bi4Ti3O12 has the excellent capability to adsorb the antibiotic compound ciprofloxacin.
Keywords
Full Text:
PDFReferences
Ariyani, M., Jansen, L.J.M., Balzer-Rutgers, P., Hofstra, N., van Oel, P., & van de Schans, M.G.M. (2024). “Antibiotic
Residues in the Cirata Reservoir, Indonesia and Their Effect on Ecology and the Selection for Antibiotic-Resistant
Bacteria”, Environmental Research, 262, 2, 119992.
[2] Voigt, A.M., Zacharias, N., Timm, C., et al, (2020). “Association between Antibiotic Residues, Antibiotic Resistant
Bacteria and Antibiotic Resistance Genes in Anthropogenic Wastewater–An Evaluation of Clinical Influences”,
Chemosphere, 241, 125032.
[3] Kraemer S.A., Ramachandran A., & Perron G.G. (2019). “Antibiotic Pollution in the Environment: From Microbial
Ecology to Public Policy. Microorganisms, 7(6), 180.
[4] Al-howri, B.M., Ismail, S., & Khajavian, M. (2025.) “Comprehensive Review of Ciprofloxacin Pollution in Water:
Sources, Environmental Impacts, Remediation Techniques, and Research Challenges”. Environmental Monitoring
and Assessmen, 197, 1095.
[5] Bai, X., Chen, W., Wang, B., Sun, T., Wu, B., & Wang Y. (2022). “Photocatalytic Degradation of Some Typical
Antibiotics: Recent Advances and Future Outlooks” International Journal of Molecular Sciences, 23(15), 8130.
[6] Wang, C., Tang, Y., Guo, K., Liu, B., Yue, Q., Gao, Y., & Gao, B. (2025). “Mechanisms of Antibiotic Combined
Pollutants Removal Using a Pulp Reject-Based Flocculant: an Insight from Antibiotic Structure”, Separation and Purification Technology, 376, 3, 134138.
[7] Hajyani, Z., Mousavi, Z., Soleimanbeigi, M., Jie Wong, Y., & Aghababai Beni A. (2025). “Antibiotic Adsorption from
Real Pharmaceutical Factory Wastewater Using a Hole-Punched Flat Ceramic Membrane Based on Clay and Hydroxyapatite In a Fixed Bed Module, Results in Engineering, 26, 105364.
[8] Liu, T., Liu, W., Li, X. et al. (2024). “Effect of Environmental Factors on Adsorption of Ciprofloxacin from Wastewater
by Microwave Alkali Modified Fly Ash” Scientific Reports, 14, 19831.
[9] Demirdağ, E., Demirel, M.F., Benek, V., et al., (2025). “Efficient Removal of Ciprofloxacin from Water Using High-
Surface-Area Activated Carbon Derived from Rice Husks: Adsorption Isotherms, Kinetics, and Thermodynamic
Evaluation”’ Molecules, 30, 2501.
[10] Kumar, A., Sharma, P., Wang, T., Lai, C.W., Sharma, G., & Dhiman, P. (2024). “Recent Progresses In Improving the
Photocatalytic Potential of Bi4Ti3O12 as Emerging Material for Environmental and Energy Applications”, Journal of
Industrial and Engineering Chemistry, 138, 1-16.
11 Bashofi S.A.R., & Prasetyo, A. (2022). “Degradasi Rhodamin B oleh Bi4Ti3O12 yang Diperoleh dari Metode Lelehan
Garam Campuran NaCl/KCl”, Positron, 13 (2), 104–111.
[12] Saputra, B.A., Aeni, S.Q., Hikmah, N., & Prasetyo, A. (2024). “Removal Ciprofloxacin through AdsorptionPhotocatalyst Properties of CaBi4Ti4O15”, Proceedings of the International Conference on Green
Technology, 14 (1).
[13] Hikmah, N., and Prasetyo, A. (2025). “Synergystic Adsorption-Photocatalysis Effect of Bi4Ti2.9Fe0.1O12 for Ciprofloxacin Removal”, Jurnal Neutrino:Jurnal Fisika dan Aplikasinya, 17 (2), 81-88.
[14] García-Rollán, M., Sanz-Santos, E., Belver, C., & Bedia, J. (2025). “Key Adsorbents and Influencing Factors in the
Adsorption of Micro- and Nanoplastics: A Review, Journal of Environmental Management, 383, 125394.
[15] Kuo, J.H., Lin, C.L., & Wey, M.Y. (2011). “Effect of Particle Agglomeration on Heavy Metals Adsorption by Al- And
Ca-Based Sorbents during Fluidized Bed Incineration”, Fuel Processing Technology, 92 (10), 2089-2098.
[16] Gupta, S.K., & Mao, Y. (2021). “A Review on Molten Salt Synthesis of Metal Oxide Nanomaterials: Status, Opportunity,
and Challenge”, Progress in Materials Science, 117, 100734.
[17] Prasetyo, A., Guntur, A.N.M., Himmah, S.N., Aini, N., Rouf, U.A., & Aziz, A. (2022). “Synthesis of Microsheets
Bi4Ti3O12 and Bi4Ti2.95V0.05O12 via Molten NaCl-KCl Salt Method”. The Journal of Pure and Applied Chemistry
Research, 11 (3): 207-13.
[18] WangY, Zhang M, Wu J, Hu Z, Zhang H, Yan H. (2020) Ferroelectric and Photocatalytic Properties of Aurivillius Phase
Ca2Bi4Ti5O18. Journal of The American Ceramics Society, 104, 322-328
[19] Zhao, Z., Li, X., Ji, H., & Deng, M. (2014). “Formation Mechanism of Plate-like Bi4Ti3O12 Particles in Molten Salt
Fluxes”, Integrated Ferroelectrics, 154, 1.
[20] Banerjee, S., Debnath, A., Allam, B.K., & Musa, N. (2021) “Adsorptive and Photocatalytic Performance of Perovskite
Material for the Removal of Food Dye in an Aqueous Solution,” Environmental Challenges, 5, 100240.
DOI: https://doi.org/10.18860/al.v13i2.36708
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Pinky Lintang Satriani Manunggal

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
This work is licensed under NME Creative Commons Atribusi-NonKomersial-BerbagiSerupa 4.0 Internasional.
ALCHEMY is managed by http://kimia.uin-malang.ac.id/
© All rights reserved 2016. Alchemy, Journal of Chemistry, eISSN 2460-6871
View My Stats
